AT2DH3系列差壓控制器-德威爾Dwyer

點擊圖片查看原圖

品牌：	德威爾Dwyer
單價：	面議
所在地：	上海
有效期至：	長期有效
最后更新：	2018-07-19 09:43
瀏覽次數：	969

店鋪基本資料信息

美國德威爾dwyer服務商
[VIP第6年] 指數:4
通過認證 [誠信檔案]
聯系人運營(女士) 銷售工程師
會員 [當前離線] [加為商友] [發送信件]
電話021-31666777
地址上海市寶山區富聯一路98弄6號

產品詳細說明

AT2DH3系列差壓控制器-德威爾Dwyer

The ATEX approved SERIES AT2DH3 Digihelic® Differential Pressure Controller is a 3-in-1 instrument possessing a digital display gage, control relay switches, and a transmitter with current output. Combining these three features allows the reduction of several instruments with one product, saving inventory, installation time and money. The ATEX approved Digihelic® controller is the ideal instrument for hazardous area pressure, velocity and flow applications by allowing for the selection of pressure, velocity or volumetric flow operation in several commonly used engineering units. Two SPDT control relays with adjustable dead bands are provided along with a scalable 4 to 20 mA process output. In velocity or flow modes, a square root output is provided on the 4 to 20 mA signal to coincide with the actual flow curve. Flame-proof ATEX enclosures are available in aluminum and can include a glass window for viewing process information and set point status on digital display.

Important notes for installation:
• Cables must be fitted through 1/2" NPT cable gland or ATEX conduit (not supplied with instrument).
• Make sure after cabling to close tight cover and cable gland, in order to keep IP66 rating (IP65 with option OPV, overpressure relief valve).
• Open cover only after de-energizing instrument.
• Attention: Check local safety rules and warnings on unit and manual for a correct use of the instrument in hazardous area.

Service: Air and non-combustible, compatible gases.

Wetted Materials: Consult factory.

Housing Material: Die cast aluminum case and bezel.

Accuracy: < 5 in w.c. (except ±2.5 in w.c.): ±1%; All other ranges: ±0.5% at 77°F (25°C) including hysteresis and repeatability (after 1 hour warm-up).

Stability: < ±1% per year.

Pressure Limits: Ranges ≤ 2.5 in w.c.: 25 psi; ±2.5", 5 in w.c.: 5 psi; 10 in w.c.: 5 psi; 25 in w.c.: 5 psi; 50 in w.c.: 5 psi; 100 in w.c.: 9 psi.

Temperature Limits: 32 to 140°F (0 to 60°C) Case: -76 to 140°F (-60 to 60°C) (Note: Product temperature limits differ from case).

Compensated Temperature Limits: 32 to 140°F (0 to 60°C).

Thermal Effects: 0.020%/°F (0.036/°C) from 77°F (25°C).

Power Requirements: 12 to 28 VDC, 12 to 28 VAC 50 to 400 Hz.

Power Consumption: 3 VA max.

Output Signal: 4 to 20 mA DC into 900 Ω max.

Zero & Span Adjustments: Accessible via menus in safe zone only.

Response Time: 250 ms (damping set to 1).

Display: Backlit 4 digit LCD 0.4" height LED indicators for set point and alarm status.

Electrical Wiring: Screw terminal.

Mounting Orientation: Mount unit in vertical plane.

Dial Size: 5" (127 mm) OD x 3-1/8" (79.38 mm).