一般特性: |
Detection type |
photoelectric sampling |
Device type |
Multiturn absolute encoder |
功能安全性參數(shù): |
MTTFd |
70 a |
Mission Time (TM) |
20 a |
L10h |
1.9 E+11 at 6000 rpm and 20/40 N axial/radial shaft load |
Diagnostic Coverage (DC) |
0 % |
電氣特性: |
Operating voltage |
10 ... 30 V DC |
No-load supply current |
max. 230 mA at 10 V DC
max. 100 mA at 24 V DC |
Power consumption |
max. 2.5 W |
Time delay before availability |
< 1000 ms |
Linearity |
± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0,5 LSB at 12 Bit |
Output code |
binary code |
Code course (counting direction) |
programmable,
cw ascending (clockwise rotation, code course ascending)
cw descending (clockwise rotation, code course descending) |
接口: |
Interface type |
PROFIBUS |
Resolution |
|
|
Single turn |
up to 16 Bit |
|
Multiturn |
14 Bit |
|
Overall resolution |
up to 30 Bit |
Transfer rate |
0.0096 ... 12 MBit/s |
Standard conformity |
PNO profile 3.062, RS-485 |
連接: |
Terminal compartment |
in removable housing cover |
符合標準: |
Degree of protection |
DIN EN 60529, IP65
IP66 (with shaft seal) |
Climatic testing |
DIN EN 60068-2-30 , no moisture condensation |
Emitted interference |
EN 61000-6-4:2007 |
Noise immunity |
EN 61000-6-2:2005 |
Shock resistance |
DIN EN 60068-2-27, 100 g, 6 ms |
Vibration resistance |
DIN EN 60068-2-6, 20 g, 10 ... 2000 Hz |
許可和認證: |
UL approval |
cULus Listed, General Purpose, Class 2 Power Source |
周圍環(huán)境: |
Operating temperature |
-40 ... 85 °C (-40 ... 185 °F) |
Storage temperature |
-40 ... 85 °C (-40 ... 185 °F) |
機械特性: |
Material |
|
|
Combination 1 |
housing: powder coated aluminum
flange: aluminum
shaft: stainless steel |
|
Combination 2 (Inox) |
housing: stainless steel
flange: stainless steel
shaft: stainless steel |
Mass |
approx. 600 g (combination 1)
approx. 1200 g (combination 2) |
Rotational speed |
max. 12000 min -1 |
Moment of inertia |
30 gcm2 |
Starting torque |
≤ 3 Ncm (version without shaft seal) |
Tightening torque, fastening screws |
max. 1.8 Nm |
Shaft load |
|
|
Angle offset |
± 0.9 ° |
|
Axial offset |
static: ± 0.3 mm, dynamic: ± 0.1 mm |
|
Radial offset |
static: ± 0.5 mm, dynamic: ± 0.2 mm |